Dyson Airblade Wash+Dry hand wash trough

Dyson Airblade Wash+Dry hand wash trough

Dyson Airblade Wash+Dry hand wash trough is the only hand dryer meeting NSF P335 and hygienic standards reduces contamination in food processing companies. Good personal hygiene starts with a well-thought-out and well-equipped hygiene lock.

At BOONS FIS you are assured of a wide range of options for optimal personal hygiene. For example, you will find sole cleaners, hand disinfection systems, hand wash troughs and hygiene stations.

handwasgoot_dyson-airblade-wash+dry_boonsfis

Put those clean and dried hands up!

In the process within a hygiene lock, the hand wash troughs are important. BOONS FIS offers four options for operating these troughs: a knee push button, a knee sensor, a tap sensor and a completely contactless operation, including hand drying, with the Dyson Airblade Wash+Dry taps.

persoonlijke-hygiene_handwasgoot_dyson-airblade_handhygiene_boonsfis
hygiene_lock
persoonlijke-hygiene_dyson-airblade_wash+dry_handen-wassen_boonsfis
Dyson-Airblade-Wash+Dry_boonsfis

Intelligent!

This Dyson tap automatically switches between water and air. The water jet or air flow is activated by intelligent infrared sensors depending on the position of the hands.

Dyson-Airblade-Wash+Dry_boonsfis
handwasgoot_dyson-airblade_haccp_boonsfis

HACCP certified

With the AirbladeTM Wash+Dry technology, hands are blown dry directly over the sink in just 12 seconds. Blowing without the use of heating, consuming less energy than standard hand dryers.

Users do not need to walk to a separate dryer, so fewer water drops fall on the floor. The tap also saves on costs, space and waste. With the Dyson Airblade Wash+Dry hand dryer, the wall space normally occupied by standalone dryers becomes available for additional dispensers, appliances, or other facilities.

This is the only certified hand dryer by HACCP International for use in the food industry.

Finishing options

Optionally, the troughs can be fitted with a stainless steel casing to protect the Dyson Airblade motor—either budget-friendly with a U-plate or more stylish with an undermount console featuring a removable front.

persoonlijke_hygiene_rvs_handwasgoot_dyson_airblade_zeepdispenser_boonsfis
hygiene_lock
handwasgoot_dyson-airblade-wash+dry_boonsfis

Operation

  • Infrared activation without touching
  • 12 seconds hand drying
    (measurement based on National Sanitation Foundation Protocol P335)
  • Auto lock is enabled after 30 seconds
  • 692 km/h air speed at openings
  • up to 29 l/sec air flow usage
  • Max. altitude above sea level: 2000 m
Alpla_persoonlijke-hygiene_handwasgoot_handhygiene_boonsfis
Alpla_persoonlijke-hygiene_handwasgoot_handhygiene_boonsfis
Alpla_persoonlijke-hygiene_handwasgoot_HS1_handhygiene_unit_boonsfis

The water function

  • 4 l/min normal water flow rate
  • 1.9 l/min with low flow aerator, supplied with the product
  • Power supply tap: Mains voltage
  • Water temperature controller thermostatic mixer tap (not included)
  • 1-8 bar water pressure required
Voordelen_Dyson_boonsfis
Dyson_airblade_wash_dry
NSF-logo

Benefits

  • No water on the floor
  • Less costs
  • Most hygienic
  • Environmentally friendly
  • Fastest hand dryer above the sink
  • Saves space
  • 5 years warranty

Dyson technology

  • Dyson' Digital V4 motor with pulse technology runs 3x faster than a regular conventional motor.
  • HEPA filter removes 99.9% of bacteria from the air and therefore blows purified, clean air.
  • With the AirbladeTM technology, the V4 engine sucks 35 liters of air through the HEPA filter. The air is blown through the 0,8 mm wide openings at 690km/h blowing off the water from the hands.

NSF Protocol P335

  • Dyson Airblade™: the only hand dryer meeting NSF P335 and hygienic standards. Air is blown through the 0.8 mm wide openings at 690 km/h, blowing water off the hands.

Learn more about food safety and hygiene

Food processing companies face strict food safety and hygiene requirements on a daily basis. At BOONS FIS, we support you with knowledge, experience and well-thought-out solutions tailored to your production environment.

Visit this news page regularly, where we offer insights to make your processes more efficient and safer. In this way, you can continue to meet the applicable standards and to strengthen customer confidence.

Contact us