Station CS-FF-1-R

Station CS-FF-1-R

411363

In addition to a stop, there are three functions available on this central satellite (CS); 2x foaming (F) and 1x rinsing (R). The control valves are mounted in a technical attic or against the ceiling (the photo below is indicative).

One pressure regulator is provided for both foam functions. This means that both foam products are set to the same pressure. When you use 2 foam products that need to be adjusted to a different pressure, you should choose the CS FF-2-R satellite.

The CS central satellites are connected to the CBU central chemical dosing units via a pipeline network.

Perfect operation of these satellites can only be obtained (and maintained) through periodic calibrations. The timing for these calibrations depends on several factors, such as the chemicals used and how often the cleaning system is used.

For a complete description, please visit this blog about choosing between a centralised and a decentralised cleaning system.

Standard equipment
  • Supplied with certificate of stainless steel used (AISI 1.4301), no use of ferritic steels (400 series) that are magnetic and liable to corrode
  • High quality A-brand components with high chemical resistance (Viton or EPDM seals depending on the chemicals used)
  • Very clean-lined design and hygienic version with a minimum of piping on the walls
  • Stainless steel non-return valves prevent the cleaning products from mixing
  • Operated by a stainless steel pneumatic selector switch
  • Fully stainless steel housing for perfect hygiene
  • Very accurate control and dosage
  • Simple control button
  • Settings can no longer be changed
Get a quote
Available variations

Brochures

Catalogue disinfection and foaming systems
Why does this satellite have two foaming functions?

The dual foaming function allows the use of two different foam agents, which is useful in sectors with specific cleaning requirements.

 

Is a separate pressure regulator needed for both foaming functions?

No, this version has a single pressure regulator for both foaming functions. If different pressure settings are required, the CS FF-2-R is the better choice.

 

How is this satellite connected to the chemical dosing unit?

The satellite is connected via a piping system to the CBU, which ensures consistent and precise chemical dosing.

 

What factors influence the system’s lifespan?

Regular maintenance, calibration, and proper alignment of the used chemicals extend the system’s operational life.

 

How quickly can the functions be switched?

Switching between foaming and rinsing takes just a moment, allowing uninterrupted cleaning and maintaining high productivity.