Hand wash troughs with Dyson Airblade
Hand wash troughs with Dyson Airblade
Standard equipment
- Supplied with certificate of stainless steel used (AISI 1.4301), no use of ferritic steels (400 series) that are magnetic and liable to corrode
- The hand-washing sinks have an extremely smooth surface, being a great benefit to hygiene compared to the sandblasted alternatives, for example
- Everything is 100% rounded off jointless for optimal hygiene, no angles or edges where dirt and bacteria can originate
- Meets the highest quality requirements for the food and general industry
- HACCP International certified for use in the food industry
- Customer-specific solutions can be supplied
- Robust construction and elegant finish
- Hand washing and drying by sensors
- Energy-efficient
Available variations
How does the hand wash trough with Dyson Airblade work?
The tap automatically switches between water and air, allowing users to wash and dry their hands directly above the sink without touching the tap.
What are the advantages of Dyson Airblade Wash+Dry technology?
This technology dries hands in just 14 seconds without heating elements, saving energy and reducing the amount of water droplets that end up on the floor.
Is the Dyson Airblade suitable for the food industry?
Yes, it is the only hand dryer certified by HACCP International for use in the food industry.
Can the hand wash trough be delivered with extra protection?
Yes, optionally a stainless steel cover can be added for extra protection of the components, available either as a cost-effective U-plate or as a stainless steel base console with a removable front panel.
How does this system contribute to cost savings?
Users dry their hands directly above the sink, which reduces the use of paper towels, minimises waste, and helps save on space and maintenance costs.
Type
|
WR1
|
WR2
|
WR3
|
WR4
|
WR5
|
WR6
|
|---|---|---|---|---|---|---|
Number of tabs
|
1
|
2
|
3
|
4
|
5
|
6
|
Voltage
|
1 x 230 V
|
2 x 230 V
|
3 x 230 V
|
4 x 230 V
|
5 x 230 V
|
6 x 230 V
|
Frequency
|
50 - 60 Hz
|
50 - 60 Hz
|
50 - 60 Hz
|
50 - 60 Hz
|
50 - 60 Hz
|
50 - 60 Hz
|
Nominal power
|
1 x 1600 W
|
2 x 1600 W
|
3 x 1600 W
|
4 x 1600 W
|
5 x 1600 W
|
6 x 1600 W
|
Power consumption
|
1 x 6.5 A
|
2 x 6.5 A
|
3 x 6.5 A
|
4 x 6.5 A
|
5 x 6.5 A
|
6 x 6.5 A
|
Degree of protection
|
IP35
|
IP35
|
IP35
|
IP35
|
IP35
|
IP35
|
Water pressure
|
1 - 8 bar
|
1 - 8 bar
|
1 - 8 bar
|
1 - 8 bar
|
1 - 8 bar
|
1 - 8 bar
|
Water supply
|
1 x 1/2”
|
2 x 1/2”
|
3 x 1/2”
|
4 x 1/2”
|
5 x 1/2”
|
6 x 1/2”
|
Water drainage
|
DN50
|
DN50
|
DN50
|
DN50
|
DN50
|
DN50
|
Drying time hands
|
12 sec
|
12 sec
|
12 sec
|
12 sec
|
12 sec
|
12 sec
|
Automatic blocking
|
activated after 30 sec. of use
|
activated after 30 sec. of use
|
activated after 30 sec. of use
|
activated after 30 sec. of use
|
activated after 30 sec. of use
|
activated after 30 sec. of use
|
Air speed at openings
|
692 km/h
|
692 km/h
|
692 km/h
|
692 km/h
|
692 km/h
|
692 km/h
|
Airflow when in use
|
up to 29 l/sec
|
up to 29 l/sec
|
up to 29 l/sec
|
up to 29 l/sec
|
up to 29 l/sec
|
up to 29 l/sec
|
Normal water flow
|
4 l/min with normally used aerator
|
4 l/min with normally used aerator
|
4 l/min with normally used aerator
|
4 l/min with normally used aerator
|
4 l/min with normally used aerator
|
4 l/min with normally used aerator
|
Low water flow rate
|
1.9 l/min with low flow aerator (included)
|
1.9 l/min with low flow aerator (included)
|
1.9 l/min with low flow aerator (included)
|
1.9 l/min with low flow aerator (included)
|
1.9 l/min with low flow aerator (included)
|
1.9 l/min with low flow aerator (included)
|
Dimensions (L x W x H) mm
|
500 x 580 x 665
|
1000 x 580 x 665
|
1500 x 580 x 665
|
2000 x 580 x 665
|
2500 x 580 x 665
|
2860 x 580 x 665
|
Article number
|
102115
|
691977
|
947543
|
800327
|
376993
|
410223
|
Related solutions
