Hygiene station HS-2
Hygiene station HS-2
Standard equipment
- Supplied with certificate of stainless steel used (AISI 1.4301), no use of ferritic steels (400 series) that are magnetic and liable to corrode
- Everything is 100% rounded off jointless for optimal hygiene, no angles or edges where bacteria can originate
- PLC control: each parameter can be set (not accessible for unauthorised persons)
- The suction pipes for products and nozzles are in stainless steel
- Meets the highest quality requirements for the food and general industry
- No passage when hands have not been cleaned
- Robust construction and elegant finish
- Durable brushes/little maintenance
- Turnstile fully in stainless steel
- Run-dry protection
Available variations
What is the HS-2 hygiene station and how does it work?
The HS-2 is a compact and user-friendly hygiene station that provides thorough hand and boot cleaning simultaneously. Access through the turnstile is only granted after the cleaning procedure has been correctly completed.
For which industries is the HS-2 suitable?
This station is designed for environments where hygiene is a top priority, such as the food industry, meat and fish processing, pharmaceuticals, and other cleanroom applications.
How are boots or shoes cleaned in the HS-2?
The HS-2 uses powerful brushes and disinfectant to effectively remove dirt and microorganisms from footwear. This process takes place fully automatically while entering the station.
Can the HS-2 be adapted to the available space?
Yes, the HS-2 can be supplied in different configurations (left- or right-handed design) so it always fits seamlessly into the existing workflow.
Is access control possible via a badge on the HS-2 unit?
Yes. The HS-2 can be equipped with a potential-free contact, allowing a badge reader to be connected for access control.
Type
|
HS-2
|
|---|---|
Hand soaping/disinfecting
|
✔️ |
Sole cleaning
|
✔️ |
Turnstile
|
✔️ |
Voltage
|
400 V
|
Frequency
|
50 Hz
|
Cable cross section
|
5 x 1,5mm2
|
Measured power
|
0,70 kW
|
Recommended pre-fuse
|
16 A
|
Water supply
|
3/4"
|
Minimum pressure
|
1,5 bar
|
Maximum pressure
|
8 bar
|
Number of brushes
|
2
|
Brushes length
|
1020 mm
|
Ø brushes
|
190 mm
|
Dimensions (L x W x H)
|
1925 x 907 x 1760 mm
|
Weight
|
199 kg
|
Article number
|
615708
|